BRPBT - AMOCO 300 MOTOR OIL SAE 15W-40
- MSDS: BRPBT
- Manufacturer: AMOCO OIL CO
- Product Name: AMOCO 300 MOTOR OIL SAE 15W-40
- National Stock Number: 9150-00-186-6709
Product Identification
Product ID:AMOCO 300 MOTOR OIL SAE 15W-40
MSDS Date:11/25/1985
FSC:9150
NIIN:00-186-6709
MSDS Number: BRPBT
Responsible Party
CHICAGO, IL 60601-6401
US
Emergency Phone: 312-856-2550
Info Phone: 312-856-2550
Preparer: STEPHEN A. ELBERT
Cage: 2V812
Contractor
Telephone: 800-652-6626
Cage: 2V812
Ingredients
REFINED HEAVY PARAFFINIC DISTILLATES
CAS: 64741-88-4
OSHA PEL 5 MG/M3 (OIL MIST)
ACGIH TLV: 5 MG/M3 (OIL MIST)
Hazards
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE-NO SIGNIFICANT IRRITATION
EXPECTED. SKIN-NONE EXPECTED FOR SINGLE SHORT-TERM EXPOSURE.
INHALATION-NONE EXPECTED UNDER USUAL CONDITIONS OF USE.
INGESTION-EXPECTED TO BE RELATIVELY NON-TOXIC.
Explanation of Carcinogenicity:CONTINUOUS LONG-TERM CONTACT WITH USED
MOTOR OIL HAS CAUSED CANCER IN ANIMAL TESTS.
Effects of Overexposure:SKIN-PROLONGED OR REPEATED CONTACT MAY PRODUCE
SOME IRRITATION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYE-FLUSH EYES WITH PLENTY OF WATER. SKIN-CONTACT WITH USED
MOTOR OIL--WASH EXPOSED SKIN THOROUGHLY WITH SOAP & WATER.
INHALATION-NONE REQUIRED. INGESTION-IF A LARGE AMOUNT IS SWALLOWED,
INDUCE VOMITI NG, GET MEDICAL ATTENTION.
Fire Fighting
Flash Point Method:COC
Flash Point:420F,216C
Extinguishing Media:AGENTS APPROVED FOR CLASS B HAZARDS (E.G., DRY
CHEMICAL, CARBON DIOXIDE, HALOGENATED AGENTS, FOAM, STEAM) OR WATER
FOG.
Fire Fighting Procedures:NONE SPECIFIED BY MANUFACTURER.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:TREAT AS AN OIL SPILL. CONTAIN AND REMOVE BY
MECHANICAL MEANS.
Handling
Handling and Storage Precautions:NO SPECIAL REQUIREMENTS.
Other Precautions:DO NOT USE GASOLINE, THINNERS, OR SOLVENTS.
Exposure Controls
Respiratory Protection:NONE REQUIRED FOR USUAL CONDITIONS OF USE.
Ventilation:NONE REQUIRED FOR USUAL CONDITIONS OF USE.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:SAFETY GOGGLES.
Other Protective Equipment:WEAR IMPRVIOUS CLOTHING WHEN WORKING WITH
USED MOTOR OILS.
Work Hygienic Practices:REMOVE OIL-SOAKED CLOTHING, INCLUDINH SHOES,
AND THOROUGHLY CLEAN & DRY BEFORE REUSE.
Supplemental Safety and Health
IN CASE OF CONTACT, WASH EXPOSED SKIN THOROUGHLY WITH SOAP & WATER OR
USE WATERLESS HAND CLEANERS TO REMOVE MOTOR OILS FROM SKIN.
Chemical Properties
HCC:V6
Spec Gravity:0.88
Solubility in Water:NEGLIGIBLE
Appearance and Odor:OILY LIQUID.
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Disposal
Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH APPLICABLE
FEDERAL, SATTE AMD LOCAL REGULATIONS. ENCLOSED-CONTROLLED
INCINERATION IS RECOMMENDED UNLESS DIRECTED OTHERWISE BY APPLICABLE
ORDINANCES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.